Real-time data for your factory.
Quantify Environmental installs permanent wireless sensors across your factory and streams everything into one modern, real-time dashboard. We stay on after the install, finding the opportunities, helping your team act on them, and bringing your costs down.
| Interval | Main incomer (kW) |
|---|---|
| 00:00 | 146 |
| 00:30 | 152 |
| 01:00 | 157 |
| 01:30 | 152 |
| 02:00 | 148 |
| 02:30 | 154 |
| 03:00 | 158 |
| 03:30 | 149 |
| 04:00 | 151 |
| 04:30 | 157 |
| 05:00 | 146 |
| 05:30 | 150 |
| 06:00 | 177 |
| 06:30 | 212 |
| 07:00 | 246 |
| 07:30 | 246 |
| 08:00 | 251 |
| 08:30 | 250 |
| 09:00 | 251 |
| 09:30 | 254 |
| 10:00 | 252 |
| 10:30 | 254 |
| 11:00 | 242 |
| 11:30 | 242 |
| 12:00 | 216 |
| 12:30 | 220 |
| 13:00 | 259 |
| 13:30 | 274 |
| 14:00 | 312 |
| 14:30 | 268 |
| 15:00 | 219 |
| 15:30 | 224 |
| 16:00 | 227 |
| 16:30 | 220 |
| 17:00 | 216 |
| 17:30 | 218 |
| 18:00 | 224 |
| 18:30 | 220 |
| 19:00 | 218 |
| 19:30 | 227 |
| 20:00 | 220 |
| 20:30 | 217 |
| 21:00 | 218 |
| 21:30 | 225 |
| 22:00 | 218 |
| 22:30 | 169 |
| 23:00 | 174 |
| 23:30 | 164 |
Trusted on factory floors across Canada.
[TOM-REVIEW] Logo permissions are confirmed client by client before launch. The band renders ONLY roster entries with a cleared asset file — clients still awaiting permission stay in src/data/logos.js and out of the render, so no empty slot can ship.
Your whole facility, one screen.
Every meter and submeter you have, water, electricity, natural gas, compressed air, temperature, vibration and level, reading minute by minute into one login. That is an Energy Management Information System, an EMIS, and it tells you the moment something drifts off its baseline rather than at the end of the month.
Every view below is server-rendered and complete. Cycling through them one at a time needs JavaScript.
| Interval | Main incomer (kW) |
|---|---|
| 00:00 | 146 |
| 00:30 | 152 |
| 01:00 | 157 |
| 01:30 | 152 |
| 02:00 | 148 |
| 02:30 | 154 |
| 03:00 | 158 |
| 03:30 | 149 |
| 04:00 | 151 |
| 04:30 | 157 |
| 05:00 | 146 |
| 05:30 | 150 |
| 06:00 | 177 |
| 06:30 | 212 |
| 07:00 | 246 |
| 07:30 | 246 |
| 08:00 | 251 |
| 08:30 | 250 |
| 09:00 | 251 |
| 09:30 | 254 |
| 10:00 | 252 |
| 10:30 | 254 |
| 11:00 | 242 |
| 11:30 | 242 |
| 12:00 | 216 |
| 12:30 | 220 |
| 13:00 | 259 |
| 13:30 | 274 |
| 14:00 | 312 |
| 14:30 | 268 |
| 15:00 | 219 |
| 15:30 | 224 |
| 16:00 | 227 |
| 16:30 | 220 |
| 17:00 | 216 |
| 17:30 | 218 |
| 18:00 | 224 |
| 18:30 | 220 |
| 19:00 | 218 |
| 19:30 | 227 |
| 20:00 | 220 |
| 20:30 | 217 |
| 21:00 | 218 |
| 21:30 | 225 |
| 22:00 | 218 |
| 22:30 | 169 |
| 23:00 | 174 |
| 23:30 | 164 |
| Interval | Municipal supply (L/min) |
|---|---|
| 18:00 | 263 |
| 18:30 | 264 |
| 19:00 | 268 |
| 19:30 | 267 |
| 20:00 | 270 |
| 20:30 | 265 |
| 21:00 | 268 |
| 21:30 | 268 |
| 22:00 | 46 |
| 22:30 | 49 |
| 23:00 | 41 |
| 23:30 | 53 |
| 00:00 | 52 |
| 00:30 | 41 |
| 01:00 | 44 |
| 01:30 | 40 |
| 02:00 | 50 |
| 02:30 | 47 |
| 03:00 | 510 |
| 03:30 | 515 |
| 04:00 | 508 |
| 04:30 | 217 |
| 05:00 | 215 |
| 05:30 | 207 |
| Value | 7.4 bar |
|---|---|
| Scale | 0.0–10.0 bar |
| Limit | 8.0 bar |
| Sensor | Area | Temperature (°C) | Relative humidity (%) | Status |
|---|---|---|---|---|
| TH-01 | PROCESS HALL | 21.4 | 46 | ok |
| TH-02 | PROCESS HALL | 23.1 | 51 | ok |
| TH-03 | PROCESS HALL | 22.0 | 47 | ok |
| TH-04 | PROCESS HALL | 22.8 | 49 | ok |
| TH-05 | PACKAGING | 20.6 | 44 | ok |
| TH-06 | COLD STORE | 6.8 | 82 | alert |
| TH-07 | DRY GOODS | 18.9 | 38 | ok |
| TH-08 | SHIPPING | 16.4 | 52 | ok |
| TH-09 | UTILITY ROOM | 27.6 | 33 | watch |
| TH-10 | QA LAB | 21.0 | 45 | ok |
| TH-11 | OFFICE & MEZZANINE | 22.2 | 41 | ok |
| TH-12 | OFFICE & MEZZANINE | 24.9 | 40 | ok |
| Interval | Drive-end RMS (mm/s) |
|---|---|
| 00:00 | 2.05 |
| 00:30 | 2.11 |
| 01:00 | 2.04 |
| 01:30 | 2.15 |
| 02:00 | 2.09 |
| 02:30 | 2.18 |
| 03:00 | 2.12 |
| 03:30 | 2.22 |
| 04:00 | 2.16 |
| 04:30 | 2.27 |
| 05:00 | 2.21 |
| 05:30 | 2.33 |
| 06:00 | 2.62 |
| 06:30 | 2.85 |
| 07:00 | 3.01 |
| 07:30 | 3.08 |
| 08:00 | 3.16 |
| 08:30 | 3.22 |
| 09:00 | 3.31 |
| 09:30 | 3.28 |
| 10:00 | 3.44 |
| 10:30 | 3.51 |
| 11:00 | 3.62 |
| 11:30 | 3.58 |
| 12:00 | 3.40 |
| 12:30 | 3.47 |
| 13:00 | 3.78 |
| 13:30 | 3.94 |
| 14:00 | 4.16 |
| 14:30 | 4.38 |
| 15:00 | 4.63 |
| 15:30 | 4.71 |
| 16:00 | 4.88 |
| 16:30 | 5.02 |
| 17:00 | 5.19 |
| 17:30 | 5.11 |
| 18:00 | 5.04 |
| 18:30 | 4.92 |
| 19:00 | 4.80 |
| 19:30 | 4.66 |
| 20:00 | 4.51 |
| 20:30 | 4.22 |
| 21:00 | 3.65 |
| 21:30 | 3.10 |
| 22:00 | 2.74 |
| 22:30 | 2.55 |
| 23:00 | 2.43 |
| 23:30 | 2.36 |
| From | To | Value (L/min) |
|---|---|---|
| Municipal supply | CIP | 430 |
| Municipal supply | Pasteurizer | 300 |
| Municipal supply | Cooling tower makeup | 190 |
| Well water | Boiler feed | 190 |
| Municipal supply | Washdown | 150 |
| Recovered loop | Cooling tower makeup | 120 |
| Recovered loop | CIP | 90 |
| Municipal supply | Unaccounted | 80 |
| Well water | Pasteurizer | 80 |
Everything feeds one dashboard.
We respect what you have already paid for. Endress and Hauser meters, a PLC with a 4-20 mA output, a legacy SCADA system, the pulse meter the utility put in years ago: we integrate them rather than rip them out. The point is one screen, not one brand of equipment.
| Source | Method |
|---|---|
| API | REST API |
| IoT devices | LoRaWAN |
| Wireless sensors | 900 MHz |
| Other systems | Modbus · existing PLC tag |
| Meters | pulse |
| Legacy equipment | 4-20 mA |
| Source | Method |
|---|---|
| API | REST API |
| IoT devices | LoRaWAN |
| Wireless sensors | 900 MHz |
| Other systems | Modbus · existing PLC tag |
| Meters | pulse |
| Legacy equipment | 4-20 mA |
- Six kinds of source, one edge computer on your network, one dashboard.
- Wireless sensors we install, meters and PLCs you already own, and the systems and databases you already run.
- A 4-20 mA signal off a machine older than your network arrives in the same place as everything else.
On your floor
One partner, from the first site walk to the last reading.
We design it, we order it, we build it, and we come and install it ourselves. The sensors are wireless and run for years on a battery, they go in without stopping your line, and the people who put them up are the people who answer when you call. White glove, start to finish.
Wireless sensor · close-up [PHOTO]
Base station · factory behind [PHOTO]
The truck at the silos [PHOTO]
Compressors, chillers, boilers [PHOTO]
Antennas · 900 MHz [PHOTO]
Two ways our system pays for itself.
Production & process visibility
Silo and material levels, vibration, product temperature, compressor and cooling-tower health. These are numbers most factories have simply never had. It is the half that is growing fastest for us, and it is where predictive maintenance starts: you fix the bearing on a Saturday instead of meeting it on a Tuesday.
Utility & overhead reduction
Water, electricity, natural gas and compressed air, metered permanently and priced. This is the half that pays back first, because it comes straight out of opex and lands in EBITDA the same year. And once there is a real baseline, optimization finally has something to aim at.
Nine places your factory is leaking money.
- 01
Water
A 10 LPM leak costs >$15,000 a year.
Submeter every major consumer. We find the leak in week one; the monthly review makes sure it gets fixed.
- 02
Electricity
Demand charges are often 30–40% of the bill.
See the peaks before the utility bills them. Shift them, shave them or schedule around them, and the dashboard shows which of the three pays.
- 03
Natural Gas
Unnoticed waste quietly inflates heating bills 10–20%.
Baseload creep is invisible on a monthly bill. It is obvious on a 60-second trace.
- 04
Compressed Air
Leaks silently eat 20–30% of compressor output.
The most expensive utility per unit of work, and the easiest 20% you will ever recover.
- 05
Silo & Material Level
Someone is still climbing the silo to check.
Non-contact radar level, continuous, with low-level alerts. No climbing, no mid-run surprises, no emergency reorders.
- 06
Vibration
A bearing changes its signature weeks before it seizes.
The shift is invisible to the human senses and unmistakable in the trend.
- 07
Predictive Maintenance
Unplanned downtime runs $10,000+/hour at most factories.
The same repair, done on a Saturday instead of in a crisis. That difference is worth more than the part.
- 08
Temperature & Humidity
The 6 a.m. round takes 31 minutes, or 0 from your desk.
Health, safety and humidex monitoring that’s watched continuously, not checked quarterly.
- 09
Process Monitoring
A hunch is not something you can act on. Data is.
Cycle counts, runtime, firing rate and product temperature: the process numbers your utility bill will never show you.
What can we measure?
Close to anything in your building, and a good deal of what is outside it. This is the short version.
- PressureLine, header and vessel pressure, continuously.
- TemperatureProduct, ambient and asset, NIST probes where it matters.
- HumidityRelative humidity in rooms, coolers and dry stores.
- VibrationThree-axis, on motors, pumps, fans and gearboxes.
- LevelSilos, tanks and totes, without the ladder.
- FlowWater and liquid flow on the main and every sub-user.
- pHEffluent, process water and CIP returns.
- Total suspended solidsWhat your wastewater surcharge is actually priced on.
- Air qualityParticulate, carbon dioxide, carbon monoxide and more.
- Water qualityConductivity, dissolved oxygen and ORP alongside pH.
- Energy and powerMains and sub-users, current draw, demand peaks.
- Compressed airFlow and pressure, so leak load stops being a guess.
- Analog signals4-20 mA, 0-10 V, pulse and dry contact.
- Process operationsRuntime, cycles and the numbers a bill never shows.
- Predictive maintenanceCatch the bearing on a Saturday, not on a Tuesday.
- Asset monitoringWhere it is, whether it moved, whether it is open.
Funding
Your project may already be covered.
Utilities and governments pay for a lot of this work. We sit down with your team and help put the paperwork together, which is not the same as being grant writers, and it is usually the difference between doing it yourselves and handing twenty per cent of the money to a funding consultant. Here are three programmes open to Canadian manufacturers right now.
Enbridge Gas: Industrial Custom Program
Enbridge Gas (Ontario)
AmountManufacturing: $0.30/m3 of annual gas saved for the first 50,000 m3, then $0.20/m3; capped at 75% of incremental project costs to a maximum of $250,000 per project
Custom incentives and engineering support for industrial natural-gas efficiency retrofits (boilers, heat recovery, steam systems, process heating and similar projects) paid per cubic metre of gas saved.
What this covers Checked
Save on Energy: Retrofit Program
IESO (Independent Electricity System Operator), Ontario
AmountUp to 50% of eligible project costs; Custom stream pays $1,800/kW or $0.20/kWh, whichever is higher; Prescriptive industrial EMIS pays $50,000 (facilities up to 400,000 GJ/yr) or $250,000 (above 400,000 GJ/yr); double incentive rates available in electricity-constrained regions (still capped at 50%)
Incentives for electricity-saving upgrades at industrial and commercial facilities (HVAC/chillers, lighting and controls, variable-speed drives, manufacturing equipment and solar PV) via prescriptive (set) and custom (measured-savings) streams. The prescriptive stream also funds installation of an industrial Energy Management Information System (EMIS), i.e. the metering and monitoring layer itself.
What this covers Checked
Ontario Made Manufacturing Investment Tax Credit (and Expanded OMMITC)
Government of Ontario
Amount10% base rate (up to $2M/year); enhanced 15% rate for expenditures May 15, 2025 – Dec 31, 2029 (up to $3M/year), on up to $20M of eligible expenditures per taxation year. The CCPC credit is refundable; the Expanded OMMITC for non-CCPCs is a 15% NON-refundable credit.
A corporate income tax credit on capital investments in Ontario manufacturing, Class 53/43 machinery and equipment used in manufacturing or processing, and Class 1 buildings used for manufacturing or processing. Refundable for CCPCs; the expanded credit for non-CCPCs is non-refundable.
What this covers Checked
TYF · Text Your Factory
Ask your factory. It answers.
Ask your factory a question in plain English and get a plain-English answer, with the chart behind it. TYF is our AI agent and it reads the same live data your dashboard does.
- “What was the water use in my facility last week, day by day?”
- “Is my compressor running well?”
- “Do a water balance.”
What was the water use in my facility last week, day by day?
Weekdays run about 40 m³. Saturday and Sunday still came in at22 and 19 m³ with the factory down. That is baseline flow, not production.
TYF is in pilot with select clients. The conversation above is illustrative.
News
What we’ve been up to.
- We ran the Industrial IoT session a second timeFour weeks after the first one, we ran the Industrial IoT webinar again on 29 November 2023, with more time spent on the questions the first session ran out of room for.
- The webinar we ran on Industrial IoT in manufacturingOn 1 November 2023 we ran a free hour on what Industrial IoT and AI actually change on a factory floor, and what they do not. Here is what we covered.
- What we heard at MeatEx in TorontoNotes from the floor: what processors asked about, what surprised them, and the one question that came up at almost every conversation.
What our clients say.
…immediate annual savings of over $150,000…
…unprecedented visibility…
I’ve never seen a system this good.
Start with a walk around your factory.
An hour on your floor, a look at your last few bills, and an honest read on what is worth metering first. If the numbers do not work we will tell you that too, and if they do you will have them before anyone asks you for a decision.
Book a site visitSee the platform
or call 1-833-QUANTFY (1-833-782-6839)